Access to the tools
The extraction tweezer is fitted to the back of the fusebox cover located inside the glove box.
- Open the glove box lid,
- unclip the fusebox cover by pulling at the top right,
- disengage the cover completely and turn it over,
remove the carrier on which the tweezer is fitted.
See also:
"Auto sequential" mode
In the automated mode, you can resume control temporarily at any time using the
steering mounted control paddles.
The use of these paddles permits manual selection of the gears in situations
whic ...
Service indicator zero reset
After each service, the service indicator must be reset to zero.
The procedure for resetting to zero is as follows: switch off the ignition,
press and hold the trip distance recorder zero reset bu ...
Welcome lighting
When the light is poor, detected by a sensor, the remote switching on of the
dipped headlamps and sidelamps makes your approach to the vehicle easier.
This function can be programmed via the conf ...