Manual controls

The wipers are controlled directly by the driver.

Model without AUTO wiping

Model without AUTO wiping

Model with AUTO wiping

Model with AUTO wiping

Windscreen wipers

Wiping speed:

Rear wiper

Rear wiper

Rear wiper selection ring:

intermittent wipe, park,

wash-wipe (set duration). intermittent wipe,

If a significant accumulation of snow or ice is present, or when using a bicycle wash-wipe (set duration).

If a significant accumulation of snow or ice is present, or when using a bicycle carrier on the boot, deactivate the automatic rear wiper via the vehicle configuration menu.

Reverse gear

When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating.

Programming

The function is activated or deactivated via the vehicle configuration menu.

The function is activated or deactivated via the vehicle configuration menu. This function is activated by default.

Windscreen wash

Pull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a pre-determined time.

    See also:

    Fitting
    When fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached. The other mats are simply placed on the carpet. ...

    Operation
    Going into engine STOP mode The "ECO" warning lamp comes on in the instrument panel and the engine goes into standby: - with a manual gearbox , at speeds below 12 mph (20 km/h), when yo ...

    Service overdue
    For 5 seconds after the ignition is switched on, the spanner fl ashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 186 miles (300 km). F ...