See also:

Repair procedure
1. Sealing Switch off the ignition. Turn the selector A to the "sealant" position. Check that the switch B is in position "O". Avoid removing any foreign bodies whic ...

Towing another vehicle
On the rear bumper, unclip the cover by pressing at the bottom. Screw the towing eye in fully. Install the towing bar. Switch on the hazard warning lamps on both vehicles. Move off gently ...

Dynamic stability control (DSC)
Activation This system is activated automatically each time the vehicle is started. It comes into operation in the event of a grip or trajectory problem. This is indicated by flashing of this wa ...